Product description
Working Principle
SCC series air flow griddle abandons geopotential working
principle, adopts the working principle of kinetic energy to do
works, with the air as carrier,. Mixes materials with the air under
pressure, then make them to enter into the middle of wheel, spay
through the net with the enough eccentricity powder, and are
collected by the snail shell. For those, which cannot through the
net, are discharged automobile through exclude to gain filtration
propose.
Introduction
Our company is the manufacture of minuteness riddle.
This machine is suitable for the kinds of powdered materials which
size between 80-530 mesh, with high filtration efficiency, high
output, automobile discharge, continuous working, no pollution
which make once hard filtration to become easy. By filtration of
light calcium with the size of 120-180 mesh, 800 mesh heavy
calcium, 400 mesh active calcium, 300 mesh haw mesh, 320-500 mesh
zinc powder, 500 mesh black ferrous oxide, red ferrous
oxide,120-160 mesh Chinese medicine powder, 180-270 mesh and
180-270 mesh silicon oxide, the output per hour is about 1 metric
ton in the square meter, the filtration efficiency we measured is
more than 95%, the dust content is lower than 10 mg/m3.
Function characteristic
High efficiency filtrationmore than 95%
The output is about 5-10 times or more than vibration griddle
Wide scope of fineness: powder materials with the size of 80-530
meshes is able go sieve with high efficiency;
Precision of products fineness: no excess and mixture grade.
Install uprightly, long life for using
Sieving procedure is processing under negative pressure and
half-cycle, no powder pollution
Be matched with all kinds of the molinary and windmill
Low noise, low waste electricity, continuous working, less
maintenance.
Materials
Black lead powder, resin powder, Chinese medicine powder, pigment,
coal ash, talcum powder ,industrial medicine, cosmetic, fire
extinguishing agent , china clay, griddle, abrasive materials,
aluminum powder, glass powder, fire-proof materials, starch, milk
powder, metallurgy, electromagnetic materials, copper powder,
carbon black, active carbon, light calcium carbonate, iron ore sand
etc.
Specification, function parameter
| SCC-600 | SCC-1000 | SCC-1600 | SCC-2000 |
airflow(m3/h) | 240 | 300 | 400 | 650 |
sieve mesh specification (mesh/inch) | 80-530 Replace wantonly |
materials granularity | 40 Dimensions upward |
sieving motor power ( kw ) | 3 | 5.5 | 15 | 22 |
rotation rate for main shaft (r.p.m) | 450—1450 |
overall diameter for sieving motor ( mm ) | 600 | 1000 | 1600 | 2000 |
whole height (mm) | 1150 | 1500 | 2300 | 2500 |
*The Company reserves the right to amend the above data.
. ***Naturalization explain all of the Company
